Politics and Stem Cell Research Essay examples - 850 Words

Politics and Stem Cell Research The President’s Council on Bioethics published â€Å"Monitoring Stem Cell Research† in 2004. This report was written in response to President Bush’s comments regarding research of human stem cells on August 9, 2001. President Bush announced that he was going to make federal funding available for research that involved existing lines of stem cells that came from embryos. He is the first president to provide any type of financial support for the research of human stem cells. A Council was created with people who are educated in the field of stem cells to help monitor the research and to recommend guidelines and consider the ethical consequences that this research could create. This report is an â€Å"update† given†¦show more content†¦Stem cell derivatives may be a beneficial source of transplantable cells that may be able to repair and regenerate certain tissues. If this could be accomplished, the medical benefits would be enormous, such as helpin g Parkinson disease, MS, diabetes, and muscular dystrophies. Although, this could be an extremely important advancement in the field of medicine, there exist many ethical and religious issues that look down upon destroying embryos for research. The stem cells that are focused on in this report are embryonic stem cells. However, adult stem cells may also be used to give rise to lineages of cells that are more specialized than themselves. They are more differentiated than embryonic stem cells. Research using adult stem cells is much less controversial since they can be obtained without destroying an embryo. There is also a strong political aspect that has been brought up in recent discussions regarding groups who try to push adult stem cell research over embryonic stem cell research since they consider it a more permissible option. In contrast, people in favor of embryonic stem cell research try to discredit the potential of adult stem cell studies. This report describes how ethics involving embryos has been ongoing for 25 years but has significantly increased with the stem cell controversy. Another issue brought up by this report is whether or not federal funds should be spent on an issue that is so ethicallyShow MoreRelatedStem Cell Research in America: A Perfect Storm of Ideology, Politics, Science, and Religion1818 Words   |  7 Pagesï » ¿Stem Cell Research in America: A Perfect Storm of Ideology, Politics, Science, and Religion By: Me March 30, 2012 Abstract This paper discusses the recent history of stem cell research in the United States, tracking the controversies, politics, and promise of new technology that comes with a moral price. Starting in August of 2001, with President Bushs request that Stem Cell Research not be paid for with federal funding, the battle of science against religion began. (Rosenburg, 2001) DespiteRead MoreStem Cell Research Controversy Essay681 Words   |  3 Pagesover stem cell research’s use in the medical field is almost two decades old. So why the sudden intense return of fierce political debates over an old issue? It’s because President Obama recently revoked the ban on stem cell research, as he believes it holds the potential to revolutionize the medical industry in the years to come. As USA Today quoted him saying in March, after he stopped restricting federal funding for stem cell research, At this moment, the full promise of stem cell research remainsRead MoreA Research On Stem Cells15 60 Words   |  7 PagesRose Hercilla Mr. Hoffman Biology Viewpoint: Political Stem Cells Stem cells are cells that are undifferentiated and can develop into any kind of cell needed in the body. The most common stem cells used for research and referred to are human embryonic stem cells. They are formed in embryos to help establish the body and organs for the fetus. Scientists can now fertilize eggs in a lab, which is a process frequently used for people who have difficulties becoming pregnant naturally, also known asRead More2017. Stem Cells. Many People Around The World Like The1133 Words   |  5 Pages 2017 Stem Cells Many people around the world like the idea of stem cells, but are they really a good thing? Stem cell research is debatably the worst way of solving problems with the human body. In fact Scientists have been researching stem cells for a very long time, since 1956 when the first successful bone marrow transplant was made by Dr. E Donnall Thomas. There are not many cons to not use stem cells but they are very important to consider. Stem cells should not be used in the medical fieldRead MoreThe Revolution or De-evolution of Stem Cell Research1728 Words   |  7 PagesRevolution or De-evolution of Stem Cell Research Many people in the around the world have first or second hand encounters with deadly diseases that can lead the person who is afflicted to a lifestyle of medication and therapy. Scientists today have the potential to find cures for these diseases with stem cell research. Stem cells have the potential on making cures for these people. Stem cell research is hindered by the opposing side’s belief that stem cell research is murder since they believe thatRead MoreControversy in the Use of Embryonic Stem Cells Essay1030 Words   |  5 Pagescan the use of stem cells be so controversial?†, one may ask. If the stem cells are donated out of free will or were going to be destroyed anyway, how can putting them to better use be controversial? Sure, a potential life must be destroyed to save a life, but only before one can tell that it is a human. Should the use of stem cells for medical research and use be regulated? These questions and more will be discussed and pondered througho ut this paper. A stem cell is defined as a cell that can changeRead MoreStem Cell Research has the Potential to Alleviate Much Suffering1425 Words   |  6 PagesLady Nancy Reagan: â€Å"Embryonic stem cell research has the potential to alleviate so much suffering. Surely, by working together we can harness its life-giving potential.† Stem cell research shows so much promise to help people by treating diseases and other problems through therapy. While it seems as though the clear answer is that we should study stem cells as soon as possible, this is sadly not the case. Stem cell research is an ongoing controversy within politics and the courts because of the processRead MoreEssay about Embryonic Stem Cell Research1357 Words   |  6 PagesHuman Embryonic Stem Cell Research Embryonic stem cell research is a highly controversial topic in todays society, this kind of stem cell commits to regenerate any type of tissue. Unfortunately, Embryonic Stem Cell Research has a dark side. To obtain these cells will kill the embryo automatically. In other words, the acquirement of the Human Embryonic Stem Cell includes performing an abortion. To obtain these cells, it would kill the embryo. This has created controversy since abortion is suchRead MoreThe Debate Over Embryonic Stem Cell Research1652 Words   |  7 PagesEmbryonic stem cell research could one day hold the key to many new scientific discoveries if it is continuously funded in the years to come. I chose to base my research around the question, Should embryonic stem cell research be government funded? When I finish highschool I hope to pursue a career in the medical field. Although I wish to become a doctor and may not be directly researching stem cells, they may one day be a treatment that I will have to administer to patients. To answer this questionRead MoreEssay about Pros and Cons of Embryonic Stem Cell Research1261 Words   |  6 PagesEmbryonic Stem Cell research mainly because they consider it unethical to use aborted fetuses for research. The two main issues concerning the research are the ethics (Cons) and the benefits (Pros). In any scientific case, ethics must always be considered. But the use of fetuses is something that is of the utmost importance. The costs are generally measured based off of people’s feelings, morals, and knowledge about the subject up for debate. The use of aborted fetuses for stem cell research may have

The History of the Invention of the Telegraph

When British officials wished to communicate between London and the naval base at Portsmouth in the early 1800s, they utilized a system called a semaphore chain. A series of towers built on high points of land held contraptions with shutters, and men working the shutters could flash signals from tower to tower. A semaphore message could be relayed the 85 miles between Portsmouth and London in about 15 minutes. Clever as the system was, it was really just an improvement on signal fires, which had been used since ancient times. There was a need for much faster communication. And by the middle of the century, Britain’s semaphore chain was obsolete. The Invention of the Telegraph An American professor, Samuel F.B. Morse, began experimenting with sending communications via electromagnetic signal in the early 1830s. In 1838 he was able to demonstrate the device by sending a message across two miles of wire in Morristown, New Jersey. Morse eventually received funds from Congress to install a line for demonstration between Washington, D.C., and Baltimore. After an abortive effort to bury wires, it was decided to hang them from poles, and wire was strung between the two cities. On May 24, 1844, Morse, stationed in the Supreme Court chambers, which were then in the US Capitol, sent a message to his assistant Alfred Vail in Baltimore. The famous first message: â€Å"What hath God wrought.† News Traveled Quickly After the Invention of the Telegraph The practical importance of the telegraph was obvious, and in 1846 a new business, the Associated Press, began using the rapidly spreading telegraph lines to send dispatches to newspaper offices. Election results were gathered via telegraph by the AP for the first time for the 1848 presidential election, won by Zachary Taylor. In the following year AP workers stationed in Halifax, Nova Scotia, begin intercepting news arriving on boats from Europe and telegraphing it to New York, where it could appear in print days before the boats reached New York harbor. Abraham Lincoln Was a Technological President By the time Abraham Lincoln became president the telegraph had become an accepted part of American life. Lincolns first State of the Union message was transmitted over the telegraph wires, as the New York Times reported on December 4, 1861:​ The message of President Lincoln was telegraphed yesterday to all parts of the loyal states. The message contained 7, 578 words, and was all received in this city in one hour and 32 minutes, a feat of telegraphing unparalleled in the Old or New World. Lincolns own fascination with the technology led him to spend many hours during the Civil War in the telegraph room of the War Department building near the White House. The young men who manned the telegraph equipment later recalled him sometimes staying overnight, awaiting messages from his military commanders. The president would generally write his messages in longhand, and telegraph operators would relay them, in military cipher, to the front. Some of Lincolns messages are examples of emphatic brevity, such as when he advised General Ulysses S. Grant, at City Point, Virginia in August 1864: â€Å"Hold on with a bulldog grip, and chew and choke as much as possible. A. Lincoln.† A Telegraph Cable Reached Under the Atlantic Ocean During the Civil War construction of telegraph lines to the west proceeded, and news from the distant territories could be sent to the eastern cities almost instantly. But the biggest challenge, which seemed utterly impossible, would be to lay a telegraph cable under the ocean from North America to Europe. In 1851 a functional telegraph cable had been laid across the English Channel. Not only could news travel between Paris and London, but the technological feat seemed to symbolize the peace between Britain and France just a few decades after the Napoleonic Wars. Soon telegraph companies began surveying the coast of Nova Scotia to prepare for laying cable. An American businessman, Cyrus Field, became involved in the plan to put a cable across the Atlantic in 1854. Field raised money from his wealthy neighbors in New York City’s Gramercy Park neighborhood, and a new company was formed, the New York, Newfoundland, and London Telegraph Company. In 1857, two ships chartered by Fields company began laying the 2,500 miles of cable, setting off from Irelands Dingle Peninsula. The initial effort soon failed, and another attempt was put off until the following year. Telegraph Messages Crossed the Ocean By Undersea Cable The effort to lay the cable in 1858 met with problems, but they were overcome and on August 5, 1858, Cyrus Field was able to send a message from Newfoundland to Ireland via the cable. On August 16 Queen Victoria sent a congratulatory message to President James Buchanan. Cyrus Field was treated as a hero upon arrival in New York City, but soon the cable went dead. Field resolved to perfect the cable, and by the end of the Civil War he was able to arrange more financing. An attempt to lay cable in 1865 failed when the cable snapped just 600 miles from Newfoundland. An improved cable was finally put in place in 1866. Messages were soon flowing between the United States and Europe. And the cable which snapped the previous year was located and repaired, so two functional cables were operating. The Telegraph Was Depicted In the Capitol Dome Constantino Brumidi, the Italian-born artist who was painting inside the newly expanded US Capitol, incorporated the transatlantic cable into two beautiful paintings. The artist was an optimist, as his lofty depictions were completed a few years before the cable was finally proven successful. In the oil painting Telegraph, Europe is portrayed as clasping hands with America while a cherub offers a telegraph wire. The spectacular fresco inside the top of the Capitols dome, Apotheosis of Washington has a panel titled Marine showing Venus helping to lay the transatlantic cable. In the Late 1800s Telegraph Wires Covered the World In the years following Fields success, underwater cables connected the Middle East with India, and Singapore with Australia. By the end of the 19th century, much of the globe was wired for communication.

How Can an Individual’s Sense of Identity be Communicated Through Their Choice of Music Free Essays

In today’s society individuality can be expressed in many different ways. The use of physical adornments such as clothes and makeup are the first things that spring to mind when discussing ways and methods of identification. However, with the mass media having such a huge influence on the young people of today, it is becoming very easy to determine one’s identity through the music they enjoy listening to. We will write a custom essay sample on How Can an Individual’s Sense of Identity be Communicated Through Their Choice of Music? or any similar topic only for you Order Now This essay seeks to determine how an individual identity can be clearly communicated through choices of music. To a certain extent, music has had an interesting effect on the way individuals express their sense of identity. The 1960’s Mods and Rockers are a good example of this. Two different types of people existing in the same society, who were easily distinguished to the type of clothing they wore and their social activities- it could be argued that this has certain relevance to tastes in music. The Mods were, of course, happy to settle for the newly released music of the time. Whereas the Rockers weren’t satisfied with the new renditions and so preferred to stick with classic rock music. This eventuated in the two groups leading wholly different ways of life, and the appearances and attitudes of both groups became a likeness of the particular ‘identities’ which are recognizable in society today. Today, there is a greater variety of music available to the mass public, and this has inevitably resulted in many different identities being formed. The 1980’s trance scene along with the new input of R ‘n’ B and Hip Hop (Black rap style music) has influenced a number of new music acts to recreate versions of the biggest hits. This has helped in creating a new identity that many nightclubs cater for. What is known as the ‘Kev’, ‘Townie’ or ‘Shaz’ has been formed! These short names are used to describe people of a certain identity. Usually people of these youth subgroups are fans of hard dance music which they listen to on a regular basis on their personal CD players in public places and are also well known for their up to date flashy mobile phones, sports clothing and tacky jewellery, as well as the occasional baseball cap. There is a rather large congregation of ‘Kevs/Townies’ on Saturday nights when they drive their flashy cars around the town centre. ‘Moshers’, ‘Goths’, ‘Metallers’ or ‘Grungers’ all form another subgroup which relies almost completely on music taste which is quite the opposite to the group discussed in the last paragraph. ‘Grungers’ are people who usually prefer to listen to music such as Nirvana and Red Hot Chili Peppers, and just generally most forms of rock and metal music. Their sense of dress is relatively easy to identify, as a certain identity has been created by the huge mass of youngsters turning to the ‘Grunger’ image in the last few years. The ‘hoodie’ has become a highly symbolic item of clothing, which many of the group members will wear when congregating. This can be teamed with baggy jeans and trousers, multiple piercings, dyed hair, visible tattoos and other common objects such as various bracelets and jewellery, although hardly ever gold or silver. The two groups previously discussed are the two huge societies in which the members’ behaviour is almost completely influenced by popular music. As it is possible to see from the descriptions above, an individuals’ sense of identity can be relatively easy to configure when using popular music as the determining factor. Due to this, increasing amounts of youth subgroups are being formed purely by musical taste. How to cite How Can an Individual’s Sense of Identity be Communicated Through Their Choice of Music?, Papers

Physics Practical; Comparing and improving two rainfall gauge experiments Essay Example Essay Example

Physics Practical; Comparing and improving two rainfall gauge experiments Essay Example Paper Physics Practical; Comparing and improving two rainfall gauge experiments Essay Introduction The aim of this experiment is to test and improve an existing rainfall measuring experiment using a potential divider. I have done this by modifying the equipment I use; this has given me a better resolution and more linear results. Apparatus For the first unimproved experiment 5 volt Dc power supply Physics Practical; Comparing and improving two rainfall gauge experiments Essay Body Paragraphs Rotary potentiometer Float Voltmeter Beaker Metal rods Blue tack Clamp stand Ruler For the second experiment; 5 volt DC power supply Rotary potentiometer Clamp stand Arm with joint Volt meter Beaker Float Ruler Safety If the water is spilt then it must be mopped up. The beaker might break if it falls on the floor therefore all equipment must be kept away from the edge of the table. The rotary potential divider must be secured in a clamp stand. This must be held tightly so that it will not fall on the table as this would damage both he table and the rotary potential divider. Diagram of Experiment 1 Diagram of Experiment 2 Theory A rotary potentiometer has a primary use in fuel gauges in cars however it is also useful in rain detectors or robot arm sensors. It works because, when a 5 volt current is passed through the two potential divider connections and the rotary arm if fully opened up the full current will pass through. However if the arm closes slightly a different output voltage is given. Therefore to measure an amount of liquid in and area the voltage is measured by a voltmeter. The voltmeter must be set across the rotary potentiometer to gain clear results. Method For the first experiment, the rotary potentiometer was connected to the power supply. After this, I connected a voltmeter to measure the voltage across the rotary potentiometer. The rotary potentiometer is then firmly attached to a clamp and stand so as not to fall out on to the table. Then I fixed a metal rod to a right angle of the potential divider from the moving spindle at the centre of the rotary potentiometer, as this moved the out put voltage changed. From this right-angled rod, another rod was attached at an angle of 90à ¯Ã‚ ¿Ã‚ ½ downwards. The rods where joined together by blue tack. This downwards rod was connected to a float, which was a ping-pong ball. Assembled it is the immersed into a beaker where the water was added and the out put voltage is to be measured. Fo r the second experiment, I did the same this made my experiment fair. However, I altered the arm, this enabled the arm to rotate more smoothly also I used a larger container for the experiment. Therefore, the float would not constantly hit the sides. In addition, I used a polystyrene float this floated better than a ping-pong ball. All output voltage will be measured in à ¯Ã‚ ¿Ã‚ ½m on the voltmeter. Also not only as I add a set increasing ml of water must I measure the output voltage I must measure how much the water level for each addition of 100ml of water has increased. Once I have this result I can calculate the average resolution for my sensor Problems For the second experiment there where minimal errors, due to the fact the aim of the second experiment was to eliminate errors from the first experiment. For the first experiment, the beaker was the wrong shape for the task. This meant that as the arm was elevated when the water started to fill the beaker the float encountered the sides and therefore giving anomalous results. To stop this from happening in the second experiment I used a larger beaker. This stopped the arm and float from hitting the side. The change in beaker shape would have affected the results for the two experiments; therefore, I used a beaker that gave enough clearance however, it was very similar to the first beaker this meant my results would not be affected by a large amount. I measured this out put voltage difference between the two beakers and compensated for it in the results from my second experiment therefore giving accurate results. Also in the first experiment the rods where joined by using two rods at 90à ¯Ã‚ ¿Ã‚ ½ through the rotary potentiometers spindle. Alternatively, though this measured the level of water accurately, it gave no give in the joint between the two arms, this allowed the float to hit the sides and give me anomalous results. To stop this from happening in the second experiment I used an arm that had been professionally made this meant that it gave accurate results because it would be at a constant angle of 70à ¯Ã‚ ¿Ã‚ ½, and did not twist or hit the side. The two arms where attached between the 70à ¯Ã‚ ¿Ã‚ ½ angle with two plastic disks these where on a pivot to allow the arms freedom to move from left to right of each other however it would not spin in the opposite direction. This spin would give the anomalous results. For the first experiment, the ping-pong ball also caused problems. When water was added to the container the ball did not rise this was because it had holes in the surface and therefore filled with water. To stop this occurring I changed the ball. In the second experiment, I changed the ball to a polystyrene ball, I did this because polystyrene floats better than a PVC ball, and this gave my results for the second experiment an extra degree of accuracy. The second experiment also had fewer problems as it was an improved experiment. At first when I set, the second e xperiment up the potential divider was faulty therefore; I had to change this for a different rotary potential divider. In addition, my first selected beaker for the second experiment also made the float hit the side and gave me faulty readings this meant I had to change for a slightly larger beaker. Results Results for the first unmodified experiment; voltage output/à ¯Ã‚ ¿Ã‚ ½m (+/-0.001V) Rainfall/ml v-out v-out v-out Average output 0 119.5 135.6 124.2 126.4 400 115.2 110.6 120.5 115.4 500 105.6 95.6 103.0 101.4 600 78.0 85.4 83.2 82.2 700 56.2 54.2 51.3 53.9 800 28.1 34.2 31.9 31.3 900 7.9 6.2 9.7 7.9 1000 2.0 0.5 1.1 1.2 Resolution 3mm Results for the second (modified) experiment; voltage output/à ¯Ã‚ ¿Ã‚ ½m (+/-0.001V) Rainfall/ml v-out v-out v-out v-out v-out Average output 0 129.4 130.0 132.0 130.8 130.3 130.0 400 117.9 121.7 122.0 120.5 119.6 120.0 500 115.3 110.7 111.9 113.2 114.3 113.4 600 82.5 83.1 81.9 83.1 83.0 82.5 700 60.0 57.5 58.6 59.7 60.7 59.6 800 30.1 29.7 32. 1 30.22 27.9 30.8 900 10.5 8.9 9.5 9.6 10.1 9.8 1000 0.9 1.01 0.8 1.03 1.01 1.01 Resolution 2.5mmThese results provide me with the evidence I need to compose graphs and to draw a conclusion. Analysis of my results The second experiment also had fewer errors as it was an improved experiment. At first when I set, the second experiment up the potential divider was faulty therefore; I had to change this for a different rotary potential divider. In addition, my first selected beaker for the second experiment also made the float hit the side and gave me faulty readings this meant I had to change for a slightly larger beaker and recalculate the difference in volt output per measure meant taken. The resolution of the second experiment was around about 3mm this was adequate for measuring rainwater as it normal rains more than 3mm in 1 day. However, I increased the resolution of the rainfall detector by 0.5mm. This shows that these small changes have improved my experiment. The graph for the first experiment is linear, despite this there are some anomalous results for example 900mm, which gave an average volt output, of 0.00079v. This could have been down to a number factor such as parallax error of measuring the water level or taking the reading during a fluctuation of the voltmeter. The results for my second experiment are obviously more accurate when plotted on a graph. This is because on the first graph there are five results that do not fit onto the trend line, however my improved experiments graphical results show that the results are more closely suited to a linear trend line. This is because of the improvements in equipment that was used also more accuracy which means less parallax error. Parallax error is human error of measurement. Evaluation The aim of the experiment was to improve an existing experiment to measure the rainfall by using a rotary potentiometer. The results that I have collected and displayed on the graph show that I have increased the accuracy of the results. The new results form an increased correlation on a trend line. In addition, the resolution of my experiment has increased by 0.5mm of water this is very impressive as I thought at the start of this experiment that the resolution would of remained the same. Also if this was to be made into a really rain measuring gauge it would be easier to keep outside and not have to monitor constantly. This is because of the alterations I have made. Before if the first experiment were left for 24 hours the float would have hit the side if it floated at all, and there would have had to be 3mm of rain for a clear reading to be taken. With the improved experiment, it could now be left outside, because the new arm joint allows the arm movement and to measure at a constant angle however, it will not hit the side of the beaker, only 2.5mm of rain would have to fall for a reading to be taken and the ball is assured to float. If I was to improve the experiment further, I would use a resis tance box, and a power supply that gave a constant 5 volts instead of a power supply that gave a fluctuating 5 volts, I would also use a more sensitive voltmeter. A resistance box would not increase the resolution however; it would increase the strength of the signal to the voltmeter and therefore giving a better reading. If I were to use a fixed 5 volt, power supply it would give me a constant 5 volts instead of fluctuating around 5 volts this would also improve my voltmeter readings and linearity of my graph. If I was to use a more sensitive voltmeter I could increase the accuracy of my results by 1 decimal place this although would not improve my results it would make them easier to anomalies and then I would be able to find a more affective way of stopping the anomalous results. We will write a custom essay sample on Physics Practical; Comparing and improving two rainfall gauge experiments Essay Example specifically for you for only $16.38 $13.9/page Order now We will write a custom essay sample on Physics Practical; Comparing and improving two rainfall gauge experiments Essay Example specifically for you FOR ONLY $16.38 $13.9/page Hire Writer We will write a custom essay sample on Physics Practical; Comparing and improving two rainfall gauge experiments Essay Example specifically for you FOR ONLY $16.38 $13.9/page Hire Writer

Female Employee Files Lawsuit against Bank of America Essays

Female Employee Files Lawsuit against Bank of America Essays Female Employee Files Lawsuit against Bank of America Essay Female Employee Files Lawsuit against Bank of America Essay Female Employees File Lawsuit Against Bank of America March 31 2010, three female Financial Adviser filed a national class action lawsuit against Bank of America and Merrill Lynch alleging sex discrimination. The New York Times reports that the lawsuit, which was filed in New York, claims that the companies have violated several federal and New York state laws, including Title VII of the Civil Rights Act of 1964 and  the New York State Human Rights Law. Employment lawyer Kelly M. Dermody says that While Merrill Lynch and Bank of America have favored male Financial Advisers to receive lucrative client opportunities, they have penalized female Financial Advisers financially for not being chosen for those advantages they created. The plaintiffs with this case include Judy Calibuso, Julie Moss, and Dianne Goedtel, who are seeking back pay and unspecified damages. In addition, theyre asking the court for a class-action status. The suit states that Bank of America and Merrill Lynch have company wide policies and practices that results with an unchecked gender bias in the workplace. Bank of America acquired Merrill Lynch in December 2008, making it the largest financial company in the nation. In Texas, thousands of people are employed with the company and with a class-action lawsuit, many residents of the Houston might be able to join the suit without hiring a Houston employment lawyer. : Yet Bank of Amercia representatives have denied the gender discrimination allegations, and say that the company plans to defend itself against the claims. In a statement, representatives even said that the company has been recognized for its success in creating and supporting a diverse and inclusive work force Institute Of business and management UET, Lahore. Submitted by Chemical Engineer Adnan Khalid, MBA-Operations and Management.

Retail Management Your complete guide to starting your career

Retail Management Your complete guide to starting your career If you’re thinking about a career in retail management, either because you’ve put in your time in the entry-level retail trenches and want to move up in the field or you’re considering a career change, you probably have a general idea of what to expect. After all, retail is not for the faint of heart. However, there’s a difference between working in retail and making it your career, so if you’re considering taking that step to level up, we have the info you’ll need to help make that decision. How will you know if it’s a good fit?If you’ve gotten this far, it’s likely you’ve already found retail to be a good fit for you, on paper. But what are the qualities you’ll need to have as a retail manager?Good personality counts for a lot here. Some common traits found in successful retail managers include:Strong customer focus. The customers may or may not always be right, but they will always be your priority. Manag ers who care about providing excellent customer service, even under stressful circumstances, do well.Leadership skills. The manager will be in charge of other employees as well as store operations, so it’s important to be someone who can step up and lead rather than melting into the crowd.The ability to make peace. Whether it’s dealing with employee drama or customer issues, at some point the manager will have to be the one who fights off irritation or frustration and placates different kinds of personalities to make sure things are resolved well.If you struggle in any of these areas, it doesn’t mean you can’t be a good retail manager, but it might mean putting in extra work to create a successful professional persona. Being part of retail management means being able to navigate the challenges of keeping everything running smoothly while also accommodating corporate/business goals and customer needs.What is the day-to-day like?Retail managers are typicall y responsible for the daily operations of a brick-and-mortar store- whether it’s a big box giant like Walmart or your Mom and Pop hardware store down the street. Basically, every store needs someone to ensure that sales goals are being met, staff are being managed, the store is operating well, and that customer needs are being met. A retail manager’s tasks may include:Opening and closing the storeHiring and managing staff membersManaging the daily employee scheduleAnalyzing sales and setting sales goals for the storeCreating and maintaining store budgetsAnalyzing and coordinating inventoryCreating store displaysWorking with and reporting to senior management in the company (for example, a head office or a store owner)Communicating financial informationWorking with vendors and suppliersEnsuring that the store is clean, organized, and well-maintainedMonitoring expenses and store losses (security)Handling escalated customer service issuesRetail managers are responsible fo r making sure everything gets done in a store, and that it’s done well. Retail managers can also expect to work long weeks (potentially more than 40 hours), on varied schedules. After all, stores are open all week long, and increasingly on holidays. This is not your standard 9-to-5 in a cubicle gig.What types of retail management jobs are out there?Some of the most common retail management job opportunities include:Store ManagerRetail Operations ManagerTeam LeaderStore General ManagerAlthough most retail management positions are still in what we would think of as â€Å"normal† stores, the retail landscape is definitely changing. So in addition to the traditional store manager roles (showing up at a specific store and making sure that physical operations are going according to plan), there will be increasing opportunities to manage digital retail as well. Managers who are well-versed in supply chain logistics or online sales have versatile skill sets that could help the m advance in our increasingly digital economy.What education will you need?One of the best things about getting started retail is that you don’t need to get an extensive education before you jump in. The retail path often starts with a high school degree and on-the-job training, and then growing experience as you take on more responsibility. Hands-on experience is often more valuable in this field than a specific education credential. To become a retail manager, however, an associate’s degree, bachelor’s degree, or course in sales, business, or management can help you get to the management level faster.If you don’t have a degree, don’t worry- there’s still a path to retail management. You can take your existing experience and use that to create longer-term goals. You can also stay and grow within a certain company, using the promotion ladder to get where you want to be. At every level of your retail career, make sure you’re learning e verything you possibly can about how your store (and retail in general) works, because this is an education you can’t get elsewhere- and you never know when that information can help boost you to the next level.What skills will you need?As mentioned before, retail managers have to be able to juggle many different obligations and tasks. These core skills will serve you very well in a retail management career.Communication skillsManagers have to be able to communicate clearly and effectively with all sorts of different people: employees, upper management, suppliers or vendors, and employees. That means being able to adapt a message to the right audience and strike the right tone as necessary. Listening skills are also essential, so that potential problems can be understood and addressed as quickly and efficiently as possible.Problem solvingEvery retail manager is going to deal with problems- problems with employees, problems with customers, problems in getting the right merchan dise, problems with security, you name it. If your solution to a direct challenge is to pull inward, turtle-style, and hope it goes away, this job might not be for you. Instead, retail managers should be able to see a problem clearly, and be able to come up with a workable solution- even if it’s not a perfect one.Results focusIt’s not enough to keep a store going- managers will also be responsible for performing well according to different metrics, whether it’s a store’s financial performance, sales goals, employee goals, customer feedback, etc. It’s crucial to understand what these criteria are that you’ll need to meet and focus your attention on hitting them.ProfessionalismAs mentioned before, the retail manager will often need to step in and be the grownup in cases of conflict or customer complaints. A professional demeanor at all times is very necessary.Math skillsRetail managers are often responsible for extensive reporting and analysis when it comes to a store’s finances and budgets, so being able to do the math efficiently and accurately is important.Negotiation skillsWhether it’s trying to create an employee schedule without causing a revolt or trying to get a better deal from vendors, knowing how to negotiate your way out of any situation is a powerful tool for a retail manager to have.Engaging people skillsRetail managers are not solo acts, so they have to be able to inspire their teams to do work together for the common good of the store. Fear and anger are not the best motivational tools around, so it’s essential to have the skills to be able to get people to want to do their best work- and to motivate them when they don’t necessarily want to do it.What is the potential career path? â€Å"Retail management† can seem like an end goal in and of itself, so if you haven’t thought much yet about the nuances of what you can do once you get to that point, you’re not alone. Once you get a certain level of management experience, those skills are very transferable all over the retail landscape. You may decide to specialize in a particular area, like one of the following:MerchandisingMarketingPersonnel managementCustomer serviceTrainingOperationsWarehousingOnce you have skills and experience, you may find that different management opportunities may open up even within the same company.What kind of salary can you expect?According to salary.com, retail managers can make a pretty wide range of salaries, with a median between $48,091 and $65,734. Specific salary depends on factors like experience and location.What is the outlook for retail management?Retail itself may be changing with the times, but the need for retail isn’t. Companies will always be selling goods, products, and services, and will always need qualified leaders to help them do that in the most efficient and profitable ways possible. Retail management is a career with solid opera tional foundations, and will continue to be an in-demand career path for those with the experience, leadership skills, and the commitment to customer service.If you’re looking for help with your resume,  you can also download free templates from our Resume Library to get started.

Role of Leadership in Managing Quality Research Paper

Role of Leadership in Managing Quality - Research Paper Example Moreover leaders establish a particular direction for their followers which allow them in managing the internal environment of the organization, business, school, institute, nation etc. Once the adherents follow guidance provided by their leader efficiently they can ultimately achieve their targeted goals, aims and objectives in an organized manner. Hence it is clearly evident that quality can easily be maintained with good leadership on any stage or medium as it is the excellence of leaders who are able to set objectives efficiently and assist their followers in implementing those objectives within specified time limits (tribehr.com, 2012). In Big Organization Considering the role of leaders in big organization it is found that leaders are proactive and lead their employees through providing example. The employees follow such instances after being inspired by the charismatic leadership of their leader rather than having a sense of dictatorship. A good leader is one who leads in a ma nner which is depicted through implementation and then leading through actions as opposed to simply dictating their rules and actions without exemplifying any real instances. Leaders recognize and act in response to the variation of the external environment and completely understand the ups and downs of the changing external environment. They are then able to communicate the right direction to their followers for attaining quality in work. The role of leadership in a big organization is to comprehend the requirements of every stakeholder such as clients, owners, suppliers, working staff, general public and any other concerned associate of the business. Every stakeholder formulates the significant part of the quality management process hence they all combine to have an effect on organization’s success. It is the quality of good leadership to induce ethical values throughout their organization which can be achieved through organization’s mission statement or they can the mselves become role models for inspiring their employees for becoming a strategic part of quality management initiative (lennoxhill.co.uk, 2011). True leadership has the ability to equip their employees with the essential resources and struggle to fulfil their duty with sincerity and accountability. The entire organization can be motivated by true leaders for fulfilling their duties and get everyone involved in the process of quality management. It is essential at this stage that leaders must inspire and recognize the contributions and efforts made by employees at all levels which will further instigate a sense of accountability amongst employees and will inspire them in attaining more results and they will voluntarily involve more in quality management procedures. This entire process is dependent on the inputs from both sides whether it is the leader or it is the company’s workforce (Ovretveit, 2005). In Educational Institution The educational field has also changed consider ably in a manner that education administration is now treated more towards the scope of educational management which is now further improvised and transformed into educational leadership. This example is clearly evident from the ceremony held in 2000 having the inauguration of the National College for School Leadership in England. The expression ‘instructional leadership’ is basically derived from North America and it has been superseded in England and all around the world by the concept of ‘learning centred leadership’. It has become a requirement for educational leaders and managers to focus all their efforts more towards the quality management of their educational institution for competing with the other leading